Toro 03676 - Using the Cutting-Unit Kickstand

g004127
Figure32
1.Reel-drivemotor2.Mountingbolts
4.Rotatethemotorcounterclockwiseuntilthe
angesencirclethebolts,andthentightenthe
bolts.
Important:Makesurethatthereelmotor
hosesarenottwisted,kinked,oratriskof
beingpinched.
5.T orquethemountingboltsto(27to33ft-lb).
4
UsingtheCutting-Unit
Kickstand
Partsneededforthisprocedure:
1
Cutting-unitkickstand
Procedure
Wheneveryoumusttipthecuttingunittoexposethe
bedknife/reel,propuptherearofthecuttingunitwith
thekickstandtomakesurethatthenutsontheback
endofthebedbar-adjustingscrewsarenotrestingon
theworksurface(Figure33).
g003985
Figure33
1.Cutting-unitkickstand
Securethekickstandtothechainbracketwiththe
snapperpin(Figure34).
g004144
Figure34
1.Chainbracket
3.Cutting-unitkickstand
2.Snapperpin
19