Toro 03676 - Adjusting the Parking-Brake Latch; Figure 109

g375942
Figure109
1.Frontjamnut(brakecable)
2.Rearjamnut
6.Tightentherearnutstomovethecable
backward,untilbrakepedalhas6to13mm(1/4
to1/2inch)offreetravel(Figure108),before
theparkingbrakeengagesthewheels.
7.Tightenthefrontjamnuts,ensuringthatboth
cablesactuatethebrakessimultaneously.
Note:Ensurethatthecableconduitdoesnot
rotatewhiletighteningthejamnuts.
Adjustingthe
Parking-BrakeLatch
Iftheparkingbrakefailstoengageandlatch,an
adjustmenttothebrakepawlisrequired.
1.Preparethemachine,refertoPreparingfor
Maintenance(page41).
2.Loosenthe2screwssecuringtheparking-brake
pawltotheframe(Figure110).
g011617
Figure110
1.Brakecables3.Parking-brakepawl
2.Screws(2)
4.Brakedetent
3.Presstheparking-brakepedalforwarduntilthe
brakedetentcompletelyengagesonthebrake
pawl(Figure110).
4.Tightenthe2screwslockingtheadjustment.
5.Pressthebrakepedaltoreleasetheparking
brake.
6.Checktheadjustmentandadjustitasrequired.
60