Toro 03676 - Hydraulic Fluid Capacity; Changing the Hydraulic Fluid

g376340
Figure114
1.Returnlter
2.Filterhead
3.Removethelter.
4.Wipecleantheltermountingareaofthelter
head.
5.Applyathincoatofthespeciedhydraulicuid
tothegasketofthenewreturnlter.
6.Threadthelterontothelterheadbyhanduntil
thegasketcontactsthemountingsurface,then
rotatethelteranadditional1/2turn.
ChangingtheChargeFilter
1.Preparethemachineformaintenance;referto
PreparingforMaintenance(page41).
2.Tilttheseat;refertoTiltingtheSeat(page42).
3.Attheleftsideofthemachine,alignadrainpan
underthechargelter(Figure115).
g376339
Figure115
1.Filterhead
2.Chargelter
4.Removethelter.
5.Wipecleantheltermountingareaofthelter
head.
6.Applyathincoatofthespeciedhydraulicuid
tothegasketofthenewchargelter.
7.Threadthelterontothelterheadbyhanduntil
thegasketcontactsthemountingsurface,then
rotatethelteranadditional1/2turn.
8.Lowerandlatchtheseat;refertoLoweringthe
Seat(page42).
CheckingforLeaks
1.Starttheengineandrunitfor2minutestopurge
airfromthehydraulicsystem.
2.Shutofftheengine,removethekey,andcheck
forleaksatthereturnandchargelters.
Note:Repairallhydraulicleaks.
HydraulicFluidCapacity
56.7L(15USgallons);refertoHydraulicFluid
Specications(page62)
ChangingtheHydraulic
Fluid
ServiceInterval:Every2,000hours—Ifyou
areusingtherecommended
hydraulicuid,changethe
hydraulicuid.
Every800hours—Ifyouarenotusingthe
recommendedhydraulicuidorhaveever
64