Toro 03676 - Drive System Maintenance; Checking the Tire Air Pressure; Checking the Torque of the Wheel Nuts; Adjusting the Traction Drive for Neutral

g375762
Figure100
1.Cap2.In-linefuseholderand
fuse
4.Removethecapfromthefuseholder.
5.Replacetheopenfusewiththesamefusetype
andamperagerating.
6.Installthecapontothefuseholder.
7.Closeandlatchthehood;refertoClosingthe
Hood(page41).
DriveSystem
Maintenance
CheckingtheTireAir
Pressure
ServiceInterval:Beforeeachuseordaily
Important:Maintaintherecommendedpressure
inalltirestoensureagoodqualityofcutand
propermachineperformance.Donotunderinate
thetires.
1.Preparethemachineformaintenance;referto
PreparingforMaintenance(page41).
2.Measurethetireairpressure.
Note:Thecorrectairpressureinthetiresis83
to103kPa(12to15psi).
3.Ifneededaddairtoorremoveairfromthetire.
4.Repeatsteps2and3attheothertires.
CheckingtheTorqueofthe
WheelNuts
ServiceInterval:Afterthersthour
Aftertherst10hours
Every250hours
WARNING
Failuretomaintainpropertorqueofthewheel
nutscouldresultinpersonalinjury.
Maintainthepropertorqueonthewheelnuts.
1.Preparethemachineformaintenance;referto
PreparingforMaintenance(page41).
2.T orquethewheelnutsto94to122N∙m(70to
90ft-lb).
AdjustingtheTraction
DriveforNeutral
Important:Themachinemustnotmovewhen
thetractionpedalisreleased(intheNEUTRAL
position).Ifthemachinemoves,adjusttraction
pumpasfollows:
1.Preparethemachineformaintenance;referto
PreparingforMaintenance(page41).
2.Jackupthefrontofthemachineuntiltheboth
fronttiresareofftheground,andsupportthe
machinewithjackstands,refertoSpecications
55