Toro 08887 - Installing the Steering Wheel; Activating and Charging the Battery

1
InstallingtheSteeringWheel
Partsneededforthisprocedure:
1
Steeringwheel
1
Rollpin(1/4x2inch)
Procedure
1.Movethefrontwheelsothatitpointsstraightahead.
2.Slidethesteeringwheelontothesteeringshaft
(Figure2).
Figure2
1.Steeringwheel
2.Rollpin
3.Securethesteeringwheelinplacewiththerollpin
(
Figure2).
2
ActivatingandChargingthe
Battery
Partsneededforthisprocedure:
-
Bulkelectrolyte,1.260specicgravity(notincluded)
Procedure
WARNING
CALIFORNIA
Proposition65Warning
Batteryposts,terminals,andrelated
accessoriescontainleadandleadcompounds,
chemicalsknowntotheStateofCalifornia
tocausecancerandreproductiveharm.
Washhandsafterhandling.
Ifthebatteryisnotlledwithelectrolyteoractivated,
bulkelectrolytewith1.260specicgravitymustbe
purchasedfromalocalbatterysupplyoutletandadded
tothebattery.
DANGER
Batteryelectrolytecontainssulfuricacidwhichisa
deadlypoisonandcausessevereburns.
•Donotdrinkelectrolyteandavoidcontactwith
skin,eyesorclothing.Wearsafetyglassesto
shieldyoureyesandrubberglovestoprotect
yourhands.
•Fillthebatterywherecleanwaterisalways
availableforushingtheskin.
1.Removethellercapsfromthebatteryandslowly
lleachcelluntilelectrolyteisuptothellline.
2.Replacethellercapsandconnecta3to4amp.
batterychargertothebatteryposts.Chargethe
batteryatarateof3to4amperesfor4to8hours.
WARNING
Chargingthebatteryproducesgassesthatcan
explode.
Neversmokenearthebatteryandkeepsparks
andamesawayfrombattery.
10