Toro 08887 - Adjusting the Traction Interlock Switch; Adjusting the Pedal for Forward; Adjusting the Steering Chain

8.Installtheengineshieldandlowertheseat.
9.Removethejackstandsandlowerthemachineto
theshopoor.Testdrivethemachinetomakesure
thatitdoesnotmovewhenthetractionpedalisin
neutral.
AdjustingtheTraction
InterlockSwitch
1.Adjustthetransmissionforneutral;referto
AdjustingtheTractionDriveforNeutral.
2.Activatethepumplevertoensurethatallpartsare
operatingfreelyandseatedproperly.
3.Adjustthescrewuntiltheairgapis.060inches
±.030(1.524mm±.762)(
Figure20).
4.Checkforproperoperation.
AdjustingthePedalfor
Forward
Thepedalmustbeadjustedforforwardifthejam
nutsonthecontrolrodareloosenedorifthepedalis
removed.
1.Parkthemachineonalevelsurface,turntheengine
off,andengagetheparkingbrake.
2.Makesurethatthepumpisinneutral.
3.Loosenthejamnutsonthecontrolrod(
Figure21).
4.Pressdownontherearofthepedaluntilthepedal
contactsthefootrest.
5.Adjustthejamnutstoallowfullstrokeofthepump,
slightlydeectingthecontrolrodwhenthepedal
isatfullstroke.
Figure21
1.Pedal
3.Controlrod
2.Jamnuts
AdjustingtheSteeringChain
Sincethechainandsprocketaresubjectedtosand
thrownupbythefronttire,inspectthemfrequentlyfor
wear.Ifeitherthechainorsprocketiswornbeyond
acceptablelimits,bothshouldbereplaced.
1.Placethefrontwheelinthestraightaheadposition
2.Adjustthelocknutsuntilthechainissnugonboth
sidesofthesprocket(
Figure22).
3.Turnthesteeringwheelfullleftandfullrighttobe
surethatthechaindoesnotbindorhangupineither
direction.Adjustasrequired.
Figure22
1.Adjustingnuts
27