CylinderHeadDisassembly(continued)
Figure136
4.Removethepivotpinandrockerarmfromthecylinderhead.
Figure137
CylinderHeadCleaningInspection
1.Removethecarbondepositsfromthecylinderhead.
2.Cleanthecylinderheadofanyremaininggasketmaterial;intake,exhaust,
valvecover,andheadgaskets.
3.Inspectthecylinderheadforcracks,specicallyaroundthefollowing:
CompressionSystem:ServiceandRepairs
Page7–16
1P65F-2ServiceManual
3429-270RevA