Toro 1P65F-2 - Piston and Rings Assembly Installation

PistonandRingsAssemblyInspection(continued)
ServiceLimit:2.552in.(64.845mm)
7.Measuretheinsidediameterofthepiston.
SleeveInsideDiameter:2.559in.(65mm)
ServiceLimit:2.565in.(65.165mm)
8.Measurepistontocylinderclearance.
ClearancetoCylinder:0.00059–0.00196in.(0.015–0.05mm).
PistonandRingsAssemblyInstallation
1.Installthepistonringsonthepiston.
2.Installthepistonintothecylinder.
Figure217
3.Turnthecrankshaftuntilthepistonisatthetopofthestroke.
Figure218
1P65F-2ServiceManual
Page7–57
CompressionSystem:ServiceandRepairs
3429-270RevA