Toro 1P65F-2 - Crankshaft Replacement Guide

GovernorAssemblyInstallation(continued)
11.Installthesumpcovertothecrankcase.Securethecrankcasewith7(10
mm)bolts.Torquetheboltsto70–105in-lbs.(8–12Nm).
Figure322
12.Turnthemotorover.
13.Zerothegovernor.
ZeroingtheGovernor
1.Movethegovernorarmsothethrottleplateatthecarburetoriswideopen.
2.Loosenthepinchboltonthegovernorarm.
3.Usingpliers,turnthegovernorshaftclockwiseuntilitstops.
4.Tightenthepinchbolt.
CrankshaftReplacement
CrankshaftRemoval
1.Draintheoil.
2.Removethe3(10mm)acornnutssecuringtherecoilassemblytothetopof
theengine.Removetherecoilassembly.
EngineLowerEnd:ServiceandRepairs
Page9–18
1P65F-2ServiceManual
3429-270RevA