Toro 1P65F-2 - Connecting Rod Replacement Procedure

CylinderHeadInstallation(continued)
Figure163
ConnectingRodReplacement
ConnectingRodRemoval
1.Draintheoil.
2.Removethe3(10mm)acornnutssecuringtherecoilassemblytothetopof
theengine.Removetherecoilassembly.
Figure164
3.Removethefueltankventhosefromthehoseretainerontheengineshroud.
Movethecarboncanistertothesideoftheengine.
CompressionSystem:ServiceandRepairs
Page7–30
1P65F-2ServiceManual
3429-270RevA