Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Step
Description
Qty.
Use
1
Speed selector lever
1
Install the speed selector lever.
2
No parts required
–
Charge and connect the battery.
3
No parts required
–
Check the uid levels.
Step
1
Installing the Speed Selector
Lever
Parts needed for this step:
1
Speed selector lever
Procedure
1. R emo v e and discard the n ut securing the bolt
and w asher to the speed selector lev er .
2. Secure the lev er to the speed selector v alv e
using the bolt and w asher as illustrated in
Figure 3 .
Note: T he lev er should be installed with the
bend to w ard the operator .
Figure 3
1. Speed selector lever
2. Speed selector valve
11
To Next Page
Loading...
