Toro 30413 - Electrical System Maintenance; Activating, Charging, and Connecting the Battery; Battery Care

connector.TurnthekeytotheOffpositionwhen
solidowisobserved.
4.Tightenthetubeconnectorsecurely.
5.Repeattheprocedureontheremainingnozzles.
ElectricalSystem
Maintenance
Activating,Charging,and
ConnectingtheBattery
Every50hours
BatteryCare
Batterytypeisgroup24.
Important:Beforeweldingonthemachine,
disconnectthenegativecablefromthebatteryto
preventdamagetotheelectricalsystem.
Note:Checkthebatteryconditionweeklyorafterevery
50hoursofoperation.Keeptheterminalsandtheentire
batterycasecleanbecauseadirtybatterywilldischarge
slowly.Tocleanthebattery,washtheentirecasewith
asolutionofbakingsodaandwater.Rinsewithclear
water.Coatthebatterypostsandcableconnectorswith
Grafo112X(skin-over)grease(ToroPartNo.505-47)
orpetroleumjellytopreventcorrosion.
Warning
CALIFORNIA
Proposition65Warning
Batteryposts,terminals,andrelated
accessoriescontainleadandleadcompounds,
chemicalsknowntotheStateofCalifornia
tocausecancerandreproductiveharm.
Washhandsafterhandling.
1.Raisetheseatandsecureitwiththeproprod.
2.Removethebatterycover(Figure54).
40