Figure47
1.Transmission-case
drain-plug
3.Hydraulic-reservoir
drain-plug
2.Filter
4.Cleantheareaaroundthehydraulic-oillterand
removeit(Figure47).
5.Immediatelyinstallanewhydraulic-oillter.
6.Installthehydraulicreservoirandtransmissioncase
drainplugs.
7.Fillthereservoirtotheproperlevel(approximately17
L[18qt]).
8.Starttheengineandcheckforoilleaks.Allowthe
enginetorunforabout5minutes,thenshutitoff.
9.After2minutes,checkthelevelofthehydraulicuid;
refertoCheckingtheHydraulicSystem(page44).
Cleaning
CleaningundertheMower
ServiceInterval:Beforeeachuseordaily
Removethegrassbuildupunderthemowerdaily.
1.DisengagethePTO,releasethetractionpedaltothe
Neutralpositionandsettheparkingbrake.
2.MovethethrottlelevertotheSlowposition,stopthe
engine,removethekey,andwaitforallmovingpartsto
stopbeforeleavingtheoperatingposition.
3.Raisethemowertothetransportposition.
4.Raisethefrontofthemachinebyusingjackstands.
5.Thoroughlycleantheundersideofthemowerwith
water.
WasteDisposal
Engineoil,batteries,hydraulicoil,andenginecoolantare
pollutantstotheenvironment.Disposeoftheseaccordingto
yourstateandlocalregulations.
45