EasyManua.ls Logo

Toro 41177 - Fuel System Maintenance; Replacing the Fuel Filter

Toro 41177
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
coatingontheinsulatorusuallymeanstheaircleaner
isdirty.
Important:Donotcleanthesparkplugs.
Alwaysreplaceasparkplugwhenithasablack
coating,wornelectrodes,anoilylm,orcracks.
2.Checkthegapbetweenthecenterandsideelectrodes
(Figure54)andbendthesideelectrode,ifthegap
isnotcorrect.
Figure54
1.Centerelectrodeinsulator3.Airgap(nottoscale)
2.Sideelectrode
InstallingtheSparkPlugs
1.Installthesparkplugsandmetalwashers.
2.Tightenthesparkplugsto18to22ft-lb(24.4to
29.8N-m).
3.Pushthewiresontothesparkplugs(Figure53).
4.Closeandlatchtheseat.
FuelSystem
Maintenance
ReplacingtheFuelFilter
ServiceInterval:Every100hours—Replacethefuel
lter.
Every400hours/Yearly(whichever
comesrst)—Inspectthefuellines.
1.Settheparkingbrake,stopthepump,stopthe
engine,andremovetheignitionkey.
2.Releasethelatchonthebackoftheseatandliftthe
seatforward.
3.Clampoffthehoseoneithersideofthefuellter
topreventgasfrompouringoutofthehoseswhen
youremovethelter.
4.Placeadrainpanunderthelter.
5.Squeezetheendsofthehoseclampstogetherand
slidethemawayfromthelter(Figure55).
6.Removethelterfromthefuellines.
Figure55
1.Hoseclamp3.Filter
2.Fuelline4.Flowdirectionarrow
7.Installanewlterandmovethehoseclampsclose
tothelter.
Ensurethattheowdirectionarrowpointstoward
theengine.
47

Table of Contents

Related product manuals