ABOUT
THIS
MANUAL
This Service Manual was written expressly for the Tor0 TC3000, TC4000 and
TC5000 Gas Powered Trimmers. The Tor0 Company had made every effort to
make the information
in
this manual complete and correct.
This manual was written with the service technician
in
mind.
It
is organized
so
that information used most often is
up
front. As a result, you will find reference
information on safety, maintenance, specifications, special tools and
troubleshooting all
in
the front third of
the
manual.
Disassembly, inspection and reassembly procedures are covered
in
the last
two-thirds of the manual and are grouped by component. We tried to cover each
common repair with its own section or sub-section. For example, you will find
that air gap adjustment and ignition coil replacement are called out separately.
And, because certain components are often difficult to troubleshoot without a
good
understanding of how they work, we have included some component theory.
This information can be found of the beginning of most service procedure
sections.
We are hopeful that you will find this manual a valuable addition to your shop. If
you should come across any errors or if you have any questions regarding this
manual, please contact us at the following address:
The Tor0 Company
81
11
Lyndale Avenue South
Bloomington, MN, USA 55420
The Tor0 Company reserves the right to change product specifications or this
manual without notice.
The Tor0 Company gratefully acknowledges the assistance of Mitsubishi Heavy
Industries, Ltd.
in
the production of this manual.
COPYRIGHT@ ALL RIGHTS RESERVED
(C)
The Toro Company
1987
MINNEAPOLIS,
MN
55420 -USA
To Next Page
Loading...
