Toro 74267 - User Manual

Questions and Answers

J
Jason SullivanAug 28, 2025
What to do if my Toro 74267 starter does not crank?
- K
  karen72Aug 29, 2025
  If the starter on your Toro Lawn Mower isn't cranking, consider these possible causes and solutions: * Ensure the blade control (PTO) is disengaged. * Make sure the parking brake is engaged. * Confirm the operator is seated. * Check if the battery is dead and charge if necessary. * Inspect electrical connections for corrosion or looseness. * Verify the fuse isn't blown and replace it if it is. * If problems persist, a relay or switch may be defective, so contact an Authorized Service Dealer.
M
mlindseyAug 27, 2025
How to fix a Toro 74267 when the starter does not crank?
- D
  Donna MooreAug 27, 2025
  If the starter of your Toro Lawn Mower doesn't crank, make sure the blade-control switch (PTO) is disengaged, the parking brake is engaged, the drive levers are in the NEUTRAL-LOCK position, you are in the operator’s seat, the battery is charged, the electrical connections are in good contact, the fuse is not blown (replace if necessary), and the relay or switch is functional (contact an Authorized Service Dealer if broken).
M
mary74Aug 27, 2025
What to do if my Toro Lawn Mower is resulting in uneven cutting height?
- H
  Heather GrahamAug 27, 2025
  If your Toro Lawn Mower is leaving an uneven cut, several factors could be the cause. Start by sharpening the blades or installing new ones if they are bent. Ensure the mower deck is level from side-to-side and front-to-rear. Clean the underside of the mower deck. Adjust the tire pressure to the correct level.
L
Lisa FarmerAug 25, 2025
Why won't my Toro Lawn Mower starter crank?
- N
  nschneiderAug 26, 2025
  If the starter on your Toro Lawn Mower doesn't crank, there are several things to check. First, ensure the blade-control switch (PTO) is disengaged and the parking brake is engaged. Make sure the drive levers are in the NEUTRAL-LOCK position and that you are seated on the seat. If these are all correct, check the battery to see if it's dead and charge it if necessary. Also, inspect the electrical connections for corrosion or looseness and ensure they have good contact. Finally, check the fuse and replace it if it's blown.
J
Joseph StricklandAug 25, 2025
What to do if my Toro 74267 Lawn Mower engine does not start?
- W
  william92Aug 25, 2025
  If your Toro Lawn Mower engine doesn't start, starts hard, or fails to keep running, several factors could be at play. Start by checking if the fuel tank is empty and fill it if needed. Ensure the fuel-shutoff valve is open. Verify the oil level in the crankcase and add oil if it's low. Make sure the throttle control is positioned midway between the SLOW and FAST settings. Check and replace the fuel filter if it's dirty. Inspect the air cleaner and clean or replace the element if it's dirty. Also, make sure the spark-plug wire is connected, and clean, adjust, or replace the spark plug if it's faulty. Finally, check the electrical connections for good contact, cleaning the connector terminals if necessary.