To Next Page
G
greenlauraSep 17, 2025
What to do if the clutch on my Toro 74923TE does not engage?
- TtrevinomichelleSep 18, 2025
If the clutch on your Toro Lawn Mower does not engage, the fuse could be blown, so replace the fuse. Check the coil resistance, battery charge, charging system, and wiring connections, and replace components if necessary. There might be low voltage supply at the clutch, so check the coil resistance, battery charge, charging system, and wiring connections and replace parts if necessary. There could be inadequate current supply, so repair or replace the clutch lead wire or electrical system and clean the connector contacts. The rotor/armature air gap might be too large, so remove the shim or replace the clutch.
General
