9
Chapter 3: Quick Start
DXi Quick Start Guide
Chapter 3: Quick Start
is chapter is a step-by-step tutorial for rapid and basic controller setup. For
the demonstration, we will set up an irrigation schedule with 2 start times:
6:15am and 8pm daily, 1 cycle at 10 minutes per station.
e Quick Start guide does not address advanced features such as
sensor setup, ow, or ET. Please refer to the DXi User Guide (373-0920)
for complete operating instructions
.
Before we can program an irrigation schedule, we must enter the date and time.
To get to the Setup screen from the Dashboard, press
the Control dial or any one of the Command buttons .
The Setup Screen
Flow Communication
Learn Flow Current Checks
& Current
Omit by Date Time & Date
Setup WED 5:43:40 PM
|Page 1|Page 2|
To Next Page
Loading...
