Toro DXI-PWM08 - Manual Operation

17
Chapter 3: Quick Start
DXi Quick Start Guide
Manual Operation
e grass is a little dry. Let us run a manual program operation at 10pm
to help keep that grass green.
1) Press the Manual button.
2) Program
3) Enter Program# eld. 4) Select program to run.
I chose 1.
5) Set Program value. 6) Navigate to Start Time
eld.
7) Enter Start Time eld.
Hours eld will ash.
8) Change hour value to 10.
9) Switch to minute eld. 10) Switch to AM/PM eld.
11) Change to PM. 12) Set value.
13) When done, to the Activate eld and .
e operation will execute this evening and save the grass.
Station
Program
Simultaneous
Sequence
Manual WED 5:43:40 PM
Program# 001
Start Time --:--AM
Activate Deactivate
Status: Off
Flow: 100 GPM Cur:1.0
Manual Program WED 5:43:40 PM