Toro DXI-PWM08 - Program Hold

15
Chapter 3: Quick Start
DXi Quick Start Guide
Program Hold
A storm is coming! Irrigation will not be needed for a few days.
Let’s activate a Program Hold on Program 1.
1) Program
2) Program 1
3) Program Hold
4) Enter Set Day(s) eld. 5) Change to desired
days. 4 days to dry out.
6) Set value.
7) When done, press .
Start Times Quick Stns
Water Days Program Hold
Run Times OPT IN’s
Program 1 Menu WED 5:43:40 PM
|Page 1|Page 2|
Hold Duration 04 Day(s)
Cancel Hold
Program 1 Hold WED 5:43:40 PM