EasyManua.ls Logo

Toro Greenmaster 1000 - Chapter 7 - Cutting Unit; Specifications

Toro Greenmaster 1000
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GREENSMASTER® 1000 Maintenance Schedule
Minimum Recommended Maintenance Intervals:
Maintenance Procedure Maintenance Interval & Service
Every
200hrs
Every
100hrs
Every
50hrs
Service Air Filter Pre-Cleaner Every
25hrs
A Level
Lubricate All Grease Fittings
Check for loose Fasteners
Clean Fuel Filter and Sediment Bowl
Adjust Traction Drive Belts B Level
Service
Change Engine Oil
1
Clean Combustion Chamber
1
Replace Spark Plug
Check Cut-Off Bar Adjustment C Level
Service
Service Air Cleaner Filter
2
Clean Combustion Chamber
2
Replace Spark Plug D Level
Service
Adjust Valves and Torque Head Bolts
Initial Break in at 20 hours
1
Interval for Engine Model: FG150
2
Interval for Engine Model: FE120
Annual Recommendations:
Item listed is recommended every 2 years.
Replace All Interlock Switches
(See Operator's and Service Manual for specifications and procedures)

Table of Contents

Related product manuals