Toro Greensmaster TriFlex 3300 - Connecting and Disconnecting the 48 V Power to the Cutting Reel Motors

ConnectingandDisconnectingthe48VPowertothe
CuttingReelMotors
CAUTION
Beforeinstalling,removing,orservicingthecuttingunits,disconnectthecuttingunitsfromthe
48Vpowersystembyseparatingthecuttingunitpowerconnectors.Thispreventsunexpected
operationofcuttingunits.
1.Parkthemachineonalevelsurfaceandlowerthecuttingunits.
2.Shutofftheengine,applytheparkingbrake,andremovethekeyfromtheignitionswitch.
3.Locatethecuttingunitpowerconnectors,whichareattachedtotheleftframerailneartheoperator’s
seat(Figure5).
g222909
Figure5
1.Cuttingunitpowerconnectors(48V)2.Operator’sseat
4.Separatethetwoconnectors.
5.Afterworkingonthecuttingunits,applyacoatofdielectricgreasetothepinsinthecuttingunitpower
connectors.
6.Reattachthetwoconnectors.
ReadingFaults
TheInfoCenterdisplayshowsinformationaboutyourmachine,suchasfaults,thechargelevelofthe12V
batteryandthe48Vbatterypack,andvariousdiagnosticmessagesandiconsthatprovidecurrentinformation
aboutthemachine.
18