Toro Groundsmaster
3500-D - Checking the Angle Indicator

g031568
Figure4
1.Negative(–)batterycable2.Positive(+)batterycable
Important:Ifyoueverremovethebattery,
installthebattery-clampboltswiththebolt
headspositionedonthebottomsideand
thenutsonthetopside.Iftheclampbolts
arereversed,theymayinterferewiththe
hydraulictubeswhenshiftingthecutting
units.
9.CoatbothbatteryconnectionswithGrafo112X
(skinover)grease(ToroPartNo.505-47),
petroleumjelly,orlightgreasetoprevent
corrosion.
10.Slidetherubberbootoverthepositiveterminal
topreventapossibleshortfromoccurring.
11.Installthebatterycover.
2
CheckingtheAngle
Indicator
Partsneededforthisprocedure:
1Inclinometer
Procedure
1.Parkthemachineonaat,levelsurface.
2.Verifythatthemachineislevelbyplacing
ahandheldinclinometer(suppliedwiththe
machine)ontheframecrossrail,bythefuel
tank(Figure5).
Note:Theinclinometershouldreadat0°when
viewedfromtheoperatingposition.
g031569
Figure5
1.Angleindicator
3.Iftheinclinometerdoesnotread0°,movethe
machinetoadifferentlocationtoobtaina0°
reading.
Note:Theangleindicator,mountedonthe
machine,shouldnowread0°also.
4.Iftheangleindicatordoesnotread0°,loosenthe
2screwsandnutssecuringtheangleindicator
tothemountingbracket,adjusttheindicatorto
obtaina0°reading,andtightenthebolts.
12