Toro Groundsmaster
3500-D - Lubrication Guide; Greasing Bearings and Bushings

Lubrication
GreasingtheBearingsand
Bushings
ServiceInterval:Every50hours—Lubricateallofthe
bearingsandbushings.
Every500hours/Yearly(whichevercomesrst)
Themachinehasgreasettingsthatyoumust
lubricateregularlywithNo.2lithiumgrease.Also,
lubricatethemachineimmediatelyafterevery
washing.
Thegreasettinglocationsandquantitiesareas
follows:
•Rearcutting-unitpivot(Figure34)
g008894
Figure34
•Frontcutting-unitpivot(Figure35)
g008895
Figure35
•2sidewinder-cylinderends(Figure36)
g008896
Figure36
•Steeringpivot(Figure37)
g195307
Figure37
•2rearlift-armpivotsandliftcylinder(Figure38)
40