Toro Groundsmaster
3500-D - Storing the Cutting Units

2.Removeanddiscardtheoillter.Installanew
oillter.
3.Relltheoilpanwithdesignatedquantityof
motoroil.
4.TurnthekeyintheswitchtotheONposition,
starttheengine,andrunitatidlespeedfor
approximately2minutes.
5.TurnthekeyintheswitchtotheOFFposition.
6.Thoroughlydrainallfuelfromthefueltank,lines,
andthefuellter/waterseparatorassembly.
7.Flushthefueltankwithfresh,cleandieselfuel.
8.Secureallfuel-systemttings.
9.Thoroughlycleanandservicetheair-cleaner
assembly.
10.Sealtheair-cleanerinletandtheexhaustoutlet
withweatherprooftape.
11.Checktheantifreezeprotectionandaddas
neededforexpectedminimumtemperaturein
yourarea.
StoringtheCuttingUnits
Ifacuttingunitisseparatedfromthetractionunitfor
anylengthoftime,installaspindlepluginthetopof
thespindletoprotectthespindlefromdustandwater.
62