Toro Groundsmaster 7200 Series - Adjusting Maximum Ground Speed; Maximum Ground Speed Adjustment

g004488
Figure53
1.Rightpumprod5.Jamnut
2.Leftpumprod6.Hexshaft
3.Balljoint7.Balljoint
4.Bolt
7.Movethemotion-controlleverforwardand
reverse,thenbacktoneutral.
Note:Thewheelmuststopturningorslightly
creepinreverse.
8.MovethethrottlelevertotheFASTposition.
Note:Makesurethatthewheelremains
stoppedorslightlycreepsinreverse;adjustit
ifnecessary.
9.Repeatsteps6through8fortheothersideof
themachine.
10.Tightenthejamnutsattheballjoints(Figure51).
11.MovethethrottlelevertotheSLOWpositionand
shutofftheengine.
12.Removethejumperwirefromthewireharness
connectorandplugtheconnectorintotheseat
switch.
WARNING
Theelectricalsystemdoesnotperform
propersafetyshutoffwiththejumper
wireinstalled.
•Removethejumperwirefromthe
wireharnessconnectorandplugthe
connectorintotheseatswitchwhen
youcompleteadjustment.
•Neveroperatethemachinewiththe
jumperinstalledandtheseatswitch
bypassed.
13.Lowertheseatintoposition.
14.Removethejackstands.
AdjustingtheMaximum
GroundSpeed
1.DisengagethePTO,movethemotion-control
leverstotheNEUTRAL-LOCKposition,and
engagetheparkingbrake.
2.MovethethrottlelevertotheSLOWposition,
shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Removetheboltssecuringthefrontpaneland
removethepanel(Figure54).
g020875
Figure54
1.Bolt
2.Controlpanel
4.Loosenthejamnutonthestopboltforacontrol
lever(Figure55).
51