Toro Multi Pro 5800 - Accessing the Settings Menu; Changing the Units of Measure (English and Metric)

•Leftselectionbutton:Sub-areasprayed(Cof
Figure27)
•Leftselectionbutton:Tankvolume(DofFigure
27)
Figure27
Note:Rotatingthestarterswitchtothestartpositionand
startingtheenginewillcausethevaluesindicatedinthe
InfoCenterdisplaytoreecttherunningmachine.
AccessingtheSettingsMenu
1.StarttheInfoCenter;refertoStartingtheInfoCenter
(page26).
Note:TheHomescreenwilldisplay.
2.Pressthecenterselectionbuttontoaccessthe
Informationcontext.
Note:Theinformationcontexticonwilldisplay
3.PressthecenterselectionbuttontoaccesstheMain
Menu(Figure28).
Figure28
AdditionaloptionsfortheHD-seriesmodelswithan
automatictransmissionarenotshown.
1.Rightselectionbutton(selectcontext)
4.Presstherightselectionbuttontodisplaytothe
Settingssubmenus.
Note:TheMainMenuwilldisplaywiththeSettings
optionselected
Note:Pressingthecenterselectionbutton(thebutton
belowthedownarrowiconinthedisplay)willmove
theselectedoptiondown.
ChangingtheUnitsofMeasure(English
andMetric)
1.AccesstheSettingsmenu;refertoAccessingthe
SettingsMenu(page27).
2.Tochangetheunitofmeasure,presstherightselection
buttontochangethelistedunitsofmeasure(Figure
29).
•English:mph,gallons,andacre
•Turf:mph,gallons,and1000ft
2
•SI(metric):kph,liter,hectare
Note:ThedisplaywillswitchbetweenEnglishand
MetricUnits
27