Toro Pro Force Debris - Daily Maintenance Checklist

To Next Page

To Previous Page

DailyMaintenanceChecklist

Duplicatethispageforroutineuse.

Fortheweekof: MaintenanceCheckItem

Mon.Tues.Wed.Thurs.Fri.

Sat.Sun.

Checktheengineoillevel.

Cleantheenginescreenand

theoilcooler.

Inspecttheairlter

pre-cleaner.

Checkthetireairpressure.

Checkblowernozzle

mountingclamptorque

Cleanthenozzleguides.

Checkanyunusualengine

noises.

Checkforuidleaks.

Touch-updamagedpaint.

NotationforAreasofConcern

Inspectionperformedby:

ItemDate

Information

Main Page

Figure 13
Table of Contents4
Safety5
General Safety5
Safety and Instructional Decals6
Setup8
Connecting the Battery8
Mounting the Hitch to the Debris Blower9
Connecting the Debris Blower to the Tow Vehicle9
Installing the Batteries into the Handheld Remote10
Product Overview11
Controls11
Handheld Remote11
Specifications13
Radio Specifications13
Attachments/Accessories13
Before Operation13
Before Operation Safety13
Fuel Specification14
Using Stabilizer/Conditioner14
Filling the Fuel Tank14
Performing Daily Maintenance14
During Operation15
During Operation Safety15
Diagnostic Light16
Starting the Engine16
Shutting off the Engine17
Using the Remote Control17
Running the Engine17
Adjusting the Blower Nozzle Direction19
Moving the Machine from the Job Site19
The Nozzle-Position Gauge20
Operating the Optional Lights20
Operating Tips21
After Operation21
After Operation Safety21
Remote Control Operation21
Hauling21
Maintenance22
Maintenance Safety22
Recommended Maintenance Schedule(S)23
Daily Maintenance Checklist24
Pre-Maintenance Procedures25
Preparing for Machine25
Preparing the Machine for Weld Repairs25
Engine Maintenance25
Engine Safety25
Servicing the Air Cleaner25
Engine Oil Specification27
Checking the Engine-Oil Level27
Changing the Oil28
Changing the Oil Filter28
Servicing the Spark Plugs29
Cleaning the Engine Screen and the Oil Cooler30
Fuel System Maintenance30
Servicing the Carbon Canister30
Replacing the Fuel Filter31
Servicing the Fuel Tank31
Electrical System Maintenance32
Electrical System Safety32
Fuses32
Drive System Maintenance33
Checking Tire Air Pressure33
Torquing the Wheel Lug Nuts33
Inspecting the Tires33
Belt Maintenance34
Adjusting the Nozzle-Control Belt Tension34
Blower Maintenance35
Checking the Blower-Nozzle Clamp35
Cleaning the Nozzle Guides35
Handheld Remote Maintenance36
Handheld Remote and the Wireless-Control Module36
Replacing the Remote Batteries37
Troubleshooting Fault Codes39
Resolving Fault Codes39
Entering Diagnostic Mode and Checking the Codes40
Resetting the Fault Codes40
Exiting Diagnostic Mode40
Cleaning41
Washing the Machine41
Disposing of Waste41
Storage42

Toro Pro Force Debris - Daily Maintenance Checklist

Table of Contents

Related product manuals