Toro Pro Force Debris - Changing Engine Oil and Filter

ChangingtheOil
ServiceInterval:Every100hoursChangetheoil
morefrequentlywhentheoperating
industyorsandyconditions.
Crankcasecapacity:2L(67oz)—withthelter
1.Starttheengineandletitrun5minutes.
Note:Warmoildrainsbetter.
2.Parkthemachinesothatthedrainsideisslightly
lowerthantheoppositesidetoensuretheoil
drainscompletely.
3.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operator’sposition.
4.Placeapanbelowthedrain.Rotatetheoil-drain
valvetoallowtheoiltodrain(Figure31).
Note:Youmayslipahoseontothedrain
valvetohelpdirecttheoilow.Thehoseisnot
includedwiththemachine.
5.Whentheoilhasdrainedcompletely,closethe
drainvalve.
Note:Disposeoftheusedoilatarecycling
center.
g002148
Figure31
1.Oil-drainvalve2.Oil-drainhose(not
included)
6.Slowlypourapproximately80%ofthespecied
oilintothellerneck(Figure32)ofthevalve
cover;refertoEngineOilSpecication(page
27).
g341990
Figure32
1.Oil-llcap(valvecover)
7.Checktheoillevel;refertoCheckingthe
Engine-OilLevel(page27).
8.Slowlyaddtheadditionaloiltobringoillevelup
tothetop-indicatormarkonthedipstick.
ChangingtheOilFilter
ServiceInterval:Every200hoursChangetheoillter
morefrequentlywhentheoperating
industyorsandyconditions.
Crankcasecapacity:2L(67oz)—withthelter
1.Draintheoilfromtheengine;refertoChanging
theOil(page28).
2.Removetheoldlterandwipethelleradapter
gasketsurface(Figure33).
g341989
Figure33
1.Oil-llcap(valvecover)2.Oillter
28