g007319
Figure37
1.Springretainerlocknut
CAUTION
Springsareundertension,usecaution
whenadjustingorremoving.
5.Loosenandremovethe2locknutsandwashers
securingtherotalinkdamperforthe#1stomper
arm(Figure38).
g007320
Figure38
1.Drivebelt4.Washer
2.Rotalinkdamper
5.#1Stomperarm
3.Nut
6.Lowertherotalinkdamperfromthecoringhead
frame.
7.Routethedrivebeltdownthroughthecoring
headframeandaroundthelowerendofthe#1
stomperarm(Figure38).
InstallingtheBelt
1.Routethenewdrivebeltaroundthelowerend
ofthe#1stomperarmandupthroughthecoring
headframe.
2.Positionthedrivebeltontothecrankpulley,
undertheidlerassemblyandoverthedrive
pulley.
3.Raisetherotalinkdamperforthe#1stomper
armtocoringheadframe.Ensurethatthe
damperspacersareinstalledinthesame
positionasinremoval.
4.Securetherotalinkdampertothecoringhead
withthe2washersandlocknutspreviously
removed.
5.Installandadjustthebeltidlerpulleyandadjust
ittotheappropriatetension.
6.Installthedirtshieldandthelowerbeltshield.
Adjustthelowershieldtoensureclearancewith
thebelt.
7.Installthepulleyandthecoringheadcovers.
33
To Next Page
Loading...
