Toro ProCore - Fueling and Oil Check Procedures; Filling the Fuel Tank Safely

Important:Donotusefueladditivescontaining
methanolorethanol.
Addthecorrectamountofgasstabilizer/conditioner
tothegas.
Note:Afuelstabilizer/conditionerismosteffective
whenmixedwithfreshgasoline.Tominimizethe
chanceofvarnishdepositsinthefuelsystem,usefuel
stabilizeratalltimes.
FillingtheFuelTank
1.Shuttheengineoffandsettheparkingbrake.
2.Cleanaroundeachfueltankcap(Figure28)and
removethecap.
Figure28
1.Fueltankcap
3.Addunleadedregulargasolinetobothfueltanks,
untilthelevelis1/4to1/2inch(6mmto13mm)
belowthebottomofthellerneck.
Thisspaceinthetankallowsgasolinetoexpand.
Donotllthefueltankscompletelyfull.
4.Installfueltankcapssecurely.
5.Wipeupanygasolinethatmayhavespilled.
CheckingtheEngineOilLevel
Beforeyoustarttheengineandusethemachine,check
theoillevelintheenginecrankcase;refertoServicing
theEngineOil.
HydraulicFluid
Important:Whenchangingtowvehiclesor
tractors,makesurethehydraulicuidare
compatiblewiththecoreprocessors.Iftheuids
arenotcompatible,anyuidremaininginthecore
processormustberemoved.
AdjustingtheBrushHeight
Thecoreprocessorshouldbeadjustedsothebrush
tipsslightlytouchthesurfacebutdonotpenetratethe
turf.Ifthebrushtipsdopenetratetheturf,improper
processingandturfdamagecouldresult.
1.Positionthecoreprocessoronalevelsurface.
2.Loosenthelocknutonheightadjustmentkey
(Figure29)soitcanbepulledoutapproximately
1/2inch.
Figure29
1.Locknut3.Rollerheightadjusting
nuts
2.Heightadjustingkey4.Rollerheightadjusting
plate
3.Loosentherollerheightadjustmentlocknuts
(Figure29).
4.Pullouttheheightadjustorkeyandmovethe
rearrollerupordownbyslidingtherollerheight
adjustingplatetothedesiredheight(Figure29).
Note:Eachnotchontheheightadjustingplate
represents1/4"rearrolleradjustment.
5.Tightenthelocknutssecuringtheadjustment.
6.Repeattheproceduretheoppositeendofthebrush.
Makesuretheadjustmentsarethesame.
23