Need help?Do you have a question about the Toro ProCore and is the answer not in the manual?
General| Brand | Toro |
|---|---|
| Model | ProCore |
| Category | Computer Hardware |
| Language | English |
Explains the meaning and use of the safety alert symbol for hazard identification.
Critical steps to take before operating the machine for safe use.
Guidelines for safe operation, including hazard awareness and terrain considerations.
Safety measures to follow during general machine maintenance procedures.
Details warnings related to entanglement hazards from belts and moving machine parts.
Alerts users to thrown object hazards and the importance of keeping bystanders clear.
Advises on safety precautions related to stored energy and machine disconnection procedures.
Highlights pinch point hazards and general warnings about keeping clear of moving parts.
Provides guidance on safely disconnecting the machine and using storage pins.
General safety guidelines for transporting the machine, including speed and operator training.
Crucial advice for operating on slopes and avoiding terrain hazards to prevent loss of control.
Key specifications for towing weight limits and maximum transport speed.
Step-by-step instructions for safely disconnecting the machine from a tow vehicle.
Detailed instructions for removing, activating, and charging the battery before installation.
Comprehensive steps for correctly installing the battery and connecting its cables.
Crucial safety warnings concerning battery short circuits, gas explosions, and proper handling.
Instructions for mounting the processor to an aerator using the one-pass hitch kit.
Guide for connecting the control link to the aerator for proper machine operation.
Detailed steps for safely disconnecting the processor from a tow vehicle.
Step-by-step guide for mounting the processor onto a Workman vehicle.
Detailed instructions for safely disconnecting the processor from a Workman vehicle.
Overview of all machine controls including brush, lift/offset, stop, ignition, throttle, and hour meter.
Detailed instructions and critical safety precautions for adding fuel to the machine.
Steps for safely filling the fuel tank and important safety considerations.
Instructions on adjusting the rear roller for optimal brush height and machine leveling.
Field procedure for adjusting the brush height for optimal core collection.
Essential steps for safely starting the engine and stopping the machine.
A comprehensive schedule outlining maintenance tasks and their recommended intervals.
Critical safety warnings concerning battery charging procedures.
To Next Page
