Toro ProCore - Lubrication - Greasing Bearings and Bushings; Greasing Fittings and Service Intervals

Lubrication
GreasingBearingsand
Bushings
ServiceInterval:Every50hours
Thecoreprocessorhas(18)greasettingsthatmust
belubricatedregularlywithNo.2GeneralPurpose
LithiumBaseGrease.Lubricatethechopper,rearroller
androtatingcornerbearingsimmediatelyafterevery
washing.
1.Lubricatethefollowinggreasettings:
•Towframe,Qty2(Figure40)
•Liftcylinder,Qty.2(Figure39&Figure42)
•Liftaxle,Qty.2(Figure39)
•Jackshaft,Qty.2(Figure42)
•Chopperassembly,Qty.2(Figure43&Figure41)
•Rotatingcorner,Qty.2(Figure43&Figure41)
•Pickupbrush,Qty.2(Figure43&Figure41)
•Rearroller,Qty.2(Figure41)
Figure39
Figure40
Figure41
34