Toro TX 700 - Changing the Hydraulic Fluid; Cleaning; Removing Debris; Washing the Machine

8.Checktheuidlevelinthehydraulictank;refer
toHydraulicFluidSpecications(page47)and
adduidtoraisetheleveltomarkondipstick.
Important:Donotoverllthetank.
9.Closethehood.
ChangingtheHydraulic
Fluid
ServiceInterval:Every500hours
1.Parkthemachineonalevelsurface,engagethe
parkingbrake,andlowertheloaderarms.
2.Shutofftheengineandremovethekey.
3.Placealargedrainpaincapableofholding57
L(15USgallons)underthedrainplugonthe
hydraulictank.
g367140
Figure73
1.Drainplug
4.Removethedrainplugandallowtheoiltodrain
intothepan.
5.Whentheoilisnisheddraining,installand
tightenthedrainplug.
Note:Disposeoftheusedoilatacertied
recyclingcenter.
6.Fillthehydraulictankwithhydraulicuid;refer
toHydraulicFluidSpecications(page47).
7.Starttheengineandletitrunforafewminutes.
8.Shutofftheengineandremovethekey.
9.Checkthehydraulic-uidlevelandadduidto
llthetankifnecessary;refertoCheckingthe
Hydraulic-FluidLevel(page48).
Cleaning
RemovingDebris
ServiceInterval:Beforeeachuseordaily
Important:Operatingtheenginewithblocked
screensand/orcoolingshroudsremovedwill
resultinenginedamagefromoverheating.
1.Parkthemachineonalevelsurfaceandlower
theloaderarms.
2.Shutofftheengine,removethekey,andallow
theenginetocool.
3.Openthehoodandsecuretheproprod.
4.Wipeawaydebrisfromtheaircleaner.
5.Cleananydebrisbuildupontheengineandin
theoilcoolernswithabrushorblower.
Important:Operatingtheenginewith
blockedscreensand/orcoolingshrouds
removedwillresultinenginedamagedueto
overheating.
6.Cleandebrisfromthehoodopening,mufer,
heatshields,andradiatorscreen(ifapplicable).
7.Closethehood.
WashingtheMachine
Whenpressurewashingthemachine,dothefollowing:
•Wearappropriatepersonalprotectiveequipment
forthepressurewasher.
•Keepallguardsinplaceonthemachine.
•Avoidsprayingatelectroniccomponents.
•Avoidsprayingatedgesofdecals.
•Spraytheexteriorofthemachineonly.Donot
spraydirectlyintoopeningsinthemachine.
•Sprayonlythedirtypartsofthemachine.
•Usea40-degreeorlargerspraynozzle.40-degree
nozzlesareusuallywhite.
•Keepthetipofthepressurewasheratleast61cm
(2ft)awayfromthesurfacebeingwashed.
•Useonlypressurewasherswithpressurebelow
13790kpa(2000psi)andowbelow7.6L(2US
gallons)perminute.
•Replacedamagedorpeelingdecals.
•Greaseallgreasepointsafterwashing;referto
GreasingtheMachine(page31).
49