Toro TX 700 - Cooling System Maintenance; Cooling System Safety; Servicing the Cooling System

6.Applythread-lockingcompoundtotheboltsof
thedrivesprockethalfthatyouremovedand
installtheothersprockethalf.T orquethebolts
to80to99N∙m(59to73ft-lb).
g366388
Figure65
1.Bolt(5)2.Sprockethalf
7.Adjustthetensioningscrewuntilthetrack
deectionis19mm(3/4inch).
g363401
Figure66
1.Tensioningscrew2.Jamnut
8.Tightenthejamnut.
9.Installthecoverandtightenthebolts.
10.Repeattheproceduretoreplacetheothertrack.
11.Lowerthemachinetotheground.
12.Drivethemachine,thenparkthemachineona
levelsurface,engagetheparkingbrake,shutoff
theengine,andremovethekey.
13.Verifythatthetracktensioniscorrect;referto
CheckingandAdjustingtheTrackTension(page
41).
CoolingSystem
Maintenance
CoolingSystemSafety
•Swallowingenginecoolantcancausepoisoning;
keepoutofreachfromchildrenandpets.
•Dischargeofhot,pressurizedcoolantortouching
ahotradiatorandsurroundingpartscancause
severeburns.
–Alwaysallowtheenginetocoolatleast15
minutesbeforeremovingtheradiatorcap.
–Usearagwhenopeningtheradiatorcap,and
openthecapslowlytoallowsteamtoescape.
ServicingtheCooling
System
ServiceInterval:Beforeeachuseordaily—Clean
thescreen,oilcooler,andfrontof
theradiator(moreoftenindirtyor
dustyconditions).
Every100hours—Checkthecoolingsystem
hoses.
CleaningtheRadiatorScreen
ServiceInterval:Beforeeachuseordaily
Removeanybuildupofgrass,dirtorotherdebrisfrom
theradiatorscreenwithcompressedair.
44