68
FI639A
1. Remove the secondary driven shaft assembly (A)
noting the location of the front and rear bearing
locating pins and the center bearing locating ring.
FI660A
FI659A
FI661A
2. Remov e the reverse idler assembly (B). Account for and
note the location of the inner bushing (1), idler shaft (2),
and outer washer (3).
FI641A
3. Remov e the dri v eshaft (C); then pull the shift fork locat-
ing shaft (D) out of the crankcase locating boss and
allo w the shift forks to disengage from the gear shift
shaft (F).
FI646
FI653A
4. Remove the gear shift shaft (F) noting the inner and
outer washers.
FI650A
To Next Page
Loading...
