What does it mean if my Toro Utility Vehicle displays codes E-0-2-9, E-0-3-0, E-0-3-2, E-0-4-6, or E-0-6-0?
If your Toro Utility Vehicle displays code E-0-2-9, E-0-3-0, E-0-3-2, E-0-4-6, or E-0-6-0, it indicates a communication error with the battery. Ensure that the connection of the signal wires to the battery is secure.
What does it mean if my Toro Workman GTX displays codes P0A44, P1520?
If your Toro Utility Vehicle displays codes P0A44, P1520, it means a motor-encoder fault occurred or the maximum motor speed was exceeded. Check the motor-encoder (speed sensor) wiring.
What to do if my Toro Workman GTX shows codes P0226 and P156C?
If you see codes P0226 and P156C on your Toro Utility Vehicle, it could be due to pressing the throttle while starting the machine or a wiring issue. To solve this, release the pedal, turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation.
What does it mean if my Toro Workman GTX Utility Vehicle displays codes P2BE8, P2BE9?
If your Toro Utility Vehicle displays codes P2BE8 and P2BE9, it indicates a main-contactor fault. Test the contact wires, coil and contacts for normal operation.
What does code E-0-2-3 mean on my Toro Workman GTX Utility Vehicle?
If your Toro Utility Vehicle displays code E-0-2-3, it indicates a high AC voltage error (greater than 270VAC). Connect the charger to an AC source that provides stable AC between 85 - 270 VAC / 45-65 Hz.
What does code E-0-1-2 mean on my Toro Utility Vehicle?
If your Toro Utility Vehicle displays code E-0-1-2, it indicates a reverse polarity error, meaning the battery is connected to the charger incorrectly. Ensure that the battery connections are secure.
What does it mean if my Toro Workman GTX displays codes P0A2F, P0A3C, P1502, P1511, P1512?
If your Toro Utility Vehicle displays codes P0A2F, P0A3C, P1502, P1511, and P1512, it means that the controller or motor is overheated or too cold. Determine if the motor or controller is very hot or very cold, then allow the machine to return to safe temperatures before resuming normal operation.
What does it mean if my Toro Workman GTX displays code E-0-2-4?
If your Toro Utility Vehicle displays code E-0-2-4, it means the charger failed to turn on properly. Disconnect the AC input and battery connection for 30 seconds before retrying.
What does it mean when my Toro Workman GTX Utility Vehicle shows codes P0226, P156C, B1107?
If your Toro Utility Vehicle displays codes P0226, P156C, and B1107, it indicates that the parking brake is engaged while in FORWARD or REVERSE, or a drive-switch fault occurred. Disengage the parking brake. Turn off the machine and check the functionality of the switches.
What does code P0A44 mean on my Toro Workman GTX Utility Vehicle?
If your Toro Utility Vehicle displays error code P0A44, it means that you exceeded the maximum motor speed. Turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation.
General| Brand | Toro |
|---|---|
| Model | Workman GTX Series |
| Category | Utility Vehicle |
| Language | English |
General safety precautions to take before starting and operating the machine.
Guidelines for safe handling and storage of fuel to prevent fires and explosions.
Crucial safety measures to follow while operating the machine.
Operator responsibilities and general safety rules for safe operation.
Procedure to raise the cargo bed for dumping loads.
Safety checks and procedures to perform after finishing operation.
Critical safety precautions to follow before and during maintenance.
Safe procedures and lifting points for raising the machine.
Schedule and procedure for greasing various points on the machine.
Essential safety precautions when performing engine maintenance.
Safety precautions for electrical system work, including battery handling.
Safety precautions when working with the cooling system.
Safety precautions to take when storing the machine.
Procedures for preparing and storing the machine for extended periods.
To Next Page
