Toro Workman GTX - Drive Train Operation

InstallingtheBattery
1.InstallthebatteryasshowninFigure49.
g034327
Figure49
2.Connectthebatterycables;refertoConnecting
theBattery(page46).
ConnectingtheBattery
ConnectthebatteryasshowninFigure50.
g034315
Figure50
ChargingtheBattery
WARNING
Chargingthebatteryproducesgassesthat
canexplode.
Neversmokenearthebatteryandkeepsparks
andamesawayfrombattery.
Important:Alwayskeepthebatteryfullycharged.
Thisisespeciallyimportanttopreventbattery
damagewhenthetemperatureisbelow0°C(32°F).
1.Removethebatteryfromthemachine;referto
RemovingtheBattery(page45).
2.Connecta3to4Abatterychargertothebattery
posts.Chargethebatteryatarateof3to4A
for4to8hours(12V).
Note:Donotoverchargethebattery.
3.Installthebattery;refertoInstallingtheBattery
(page46).
StoringtheBattery
Ifyoustorethemachineformorethan30days,
removethebatteryandchargeitfully.Eitherstore
itontheshelforonthemachine.Leavethecables
disconnectedifitisstoredonthemachine.Store
thebatteryinacoolatmospheretoavoidquick
deteriorationofthechargeinthebattery.T oprevent
thebatteryfromfreezing,makesureitisfullycharged.
46