Product Overview
8
6
7
4
3
Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine
is running. Use these times for scheduling regular
maintenance (Figure 4).
Glow Plug Light
The glow plug indicator light turns on when the
glow plug button is engaged (Figure 4).
5
Glow Plug Switch
This switch activates the glow plugs and is
indicated by the glow plug light. Hold down the
glow plug switch for 10 seconds prior to starting.
Figure 3
2
1. Motion control lever 5. Controls
2. Parking brake lever 6. Seat belt
3. Height-of-cut lever 7. Roll bar
4. Fuel cap (both sides) 8. Engine screen
G001047
Controls
Become familiar with all the controls before you
start the engine and operate the machine (Figure 3
and Figure 4).
8 3 4 5
\
6
7
Temperature Light
The temperature light comes on when the engine
is over heating (Figure 4).
Audible Alarm
This machine has an audible alarm that alerts the
user to turn off the engine or engine damage can
occur from over heating. Refer to Servicing the
Cooling System in Cooling System Maintenance,
page 43.
Fuel Selector Valve
The fuel selector valve is located behind the seat.
Close the fuel selector valve when transporting or
storing mower.
Move the selector valve to the lefthand (LH) or
righthand (RH) position for operation.
9
2
G001814
Figure 4
1. Hour meter 6. Throttle control
2. Ignition switch 7. PTO Switch
3. Glow plug switch 8. Audible alarm
4. Glow plug light 9. Fuel selector valve
5. Engine Temperature light
14
To Next Page
Loading...
