Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Maintenance Procedure
I nte rva I
Afterthefirst8 operating • Check cooling system level.
hours • Check the hydraulic fluid.
After the first 25
• Change the hydraulic filter and oil.
operating hours
After the first 50 • Change the engine oil.
operating hours • Change the engine oil filter.
After the first 100
• Change gear box oil.
operating hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 100 hours
• Check the safety system.
• Check the engine oil.
• Check cooling system level.
• Clean the engine oil cooler.
• Check the mower blades.
• Clean the mower deck.
• Grease the mower deck and spindles.
• Grease the mower belt idler arm.
• Grease the pump belt idler arm.
• Grease the drive belt idler arm.
• Grease the brake lever.
• Check the hydraulic fluid.
• Check the tire pressure.
• Check the PTO drive belt.
• Check the pump drive belt.
• Check the alternator belt.
• Change the engine oil.
• Check the gear box oil level.
• Check the cooling system hoses.
• Inspect the belts for cracks and wear.
• Check the hydraulic hoses.
Every 150 hours • Lubricate the machine with light oil (Refer to Lubrication).
• Change the engine oil filter.
Every 200 hours
• Grease the brake pivot.
Every 250 hours • Check and/or replace the air filter (more often in dirty or dusty conditions).
Every 400 hours • Replace the fuel filters.
• Check the wheel hub slotted nut.
Every 500 hours
• Adjust the caster pivot bearing.
• Grease the front caster pivots (more often in dirty or dusty conditions).
• Change the gear box oil.
Yearly • Change the engine coolant.
• Change the hydraulic filter and oil.
Important: Refer to your engine operator's manual for additional maintenance procedures.
30
To Next Page
Loading...
