Carefully release pressure from components
with stored energ}_
Disconnect battery or remove spark plug wire
before making any repairs. Disconnect the
negative terminal first and the positive last.
Reconnect positive first and negative last.
Use care when checking blades. Wrap the
blade(s) or wear gloves, and use caution when
servicing them. Only replace blades. Never
straighten or weld them.
Keep hands and feet away from moving parts.
If possible, do not make adjustments with the
engine running.
Charge batteries in an open well ventilated
area, away from spark and flames. Unplug
charger before connecting or disconnecting
from batter 7 Wear protective clothing and use
insulated tools.
Keep all parts in good working condition and
all hardware tightened. Replace all worn or
damaged decals.
Use only Toro approved attachments.
Warranty may be voided if used with
unapproved attachments.
To Next Page
Loading...
