Toshiba 40G30U - TV Front and Side Panel Controls and Connections; Learning about the Remote Control

TV front and side panel controls and connections
Model 40G300U is used in this manual for illustration purposes.
Left side panel
TV front
2
TV top
Lfl----" -I--~
1
~"a'JI
11-l~L
v~:
12-[1~~
USB
Control panel
1 Green LED and TOSHIBA Logo LED
Power LED(Green) = Power indicator
TOSHIBA Logo LED= On or Off
(1& page 30).
2 Remote sensor - Point the remote control
toward this remote sensor
(1& "Remote control
effective range" on page 21).
3 POWER - Press to turn the TV on and off.
If the TV stops responding to the controls on
the remote control or TV control panel and you
cannot turn off the
TV, please unplug the power
cord few seconds then re-plug to try again.
4 ARROWS J;,. T .... ~ - When a menu is on-
screen, these buttons function as up/down/left/
right menu navigation buttons.
5 MENU (ENTER) - Press to access the menu
system
(1& pages 28-29). When a menu is on-
screen, the
MENU button on the TV's control
panel functions as the
ENTER button.
6 EXIT - Press to instantly close an on-screen
menu.
8 VOLUME .... ~ - These buttons adjust the
volume level.
9 INPUT - Repeatedly press to change the source
you are viewing
(ANT/CABLE, VIDEO 1, VIDEO
2, ColorStream HD, HDMI1, HDMI2, HDMI3,
HDMI4, PC).
10 HDMI® IN - High-Definition Multimedia
Interface input receives digital audio and
uncompressed digital video from an HDMI
device or uncompressed digital video from a DVI
device. HDMI connection is necessary to receive
I080p signals.
11 VIDEO-2 IN - The side panel AN connections
are referred to as
"VIDEO 2" and include standard
A/V connections.
12 USB port - To access photo or music files.
7 CHANNEL J;,. T - When no menu is on-screen,
these buttons change the channel (programmed
channels only;
1& page 31).
11