Chapter
If:
Menu
layout
anlt
navigation
Setup/Installation
menu
layout
The
Installation menu contains the Terrestrial and System Status menus.
To open the
Installation
menu (illustrated below), press
M~U
on the
remote
control
or
TV
control panel, open the
Setup
menu, select
Installation,
and press
8.
Icon
Terrestrial
System
Status
Item
Input Configuration
Channel Program
Channel
Options
Channel
Tuning
Mode
Time
Zone
Signal
Meter
System Information
Option
[Opens the Input Configuration menu]
[Start]
~ [Scans for new channels on
ANT/CABLE]
[Opens the Skip / Lock Channel
menul
Standard / Auto / Digital
Eastern / Newfoundland / Atlantic / Hawaii / Alaska /
Pacific / Mountain / Central
[Opens the Signal
Meter
menuI
[Opens the System Information screen]
Navigating
the
menu
system
You
can
use the buttons on the remote control
or
TV
control panel to access and navigate your
TV's
on-
screen menu system.
MENU
• Press 0 to open the menu system.
•
When
a menu is open, use the up/down/leftJright
arrow buttons
(A
T'"
~)
on the
remote
control
or
TV
control panel to
move
in
the
corresponding
direction
in
the menu.
• Press
8 to save
your
menu settings
or
select
a highlighted item. (A highlighted menu item
appears
in
a different
color
in
the menu.)
• All menus close automatically
if
you
do
not make
a selection within
60 seconds,
except
the signal
meter menu, which closes automatically after
about 5 minutes.
. EXIT
• To
close
a menu Instantly. press
O.
Note:
The
menu background may sometimes
appear
black, depending on the signal the
TV
is
receiving.
This
is
not a sign
of
malfunction.
29
I
To Next Page
Loading...
