Toshiba 40G30U - Using the FREEZE Feature; Adjusting the Picture; Selecting the Picture Mode

Chapter 6: Using the TVs features
To turn on the auto aspect ratio feature:
1
MENU •
Press 0 and open the Picture menu.
2 Highlight Theater Settings and press @.
3 In the Auto Aspect Ratio field, select On.
4 To save the new settings, highlight Oone and press
@. To revert to the factory defaults, highlight
Reset and press @.
To turn off the auto aspect ratio feature:
Select Off in step 3 above.
Using the FREEZE feature
To use the FREEZE feature:
1
Wh
. . h
TV FREEZE
en VleWI ng t e . press 0 to make the
picture a sti
II picture.
2
-r I" FREEZE
I a return to t le movlIlg pIcture, press 0
again (or any other button).
Note: If the TV is left in FREEZE mode for
more than
15 minutes, the FREEZE mode
will automatically be released
and the TV will
return
to moving picture.
Using the FREEZE function for any purpose
other than your private viewing may be
prohibited under the Copyright Laws of the
United States and other countries, and
may
subject you to civil and criminal liability.
Adjusting the picture
Selecting the picture mode
You can select your desired picture settings from four
different modes, as described below.
To select the picture mode using the menu
system:
1
MENU •
Press 0 and open the PIcture menu.
2 Highlight Mode and press @.
3 Press. or T to select the picture mode you
prefer and press
@.
Sports
Standard
Movie
PC
Preference
Mode
Spans
Standard
Movie
PC
Preference
Picture Quality
Bright and dynamic picture (factory
setting)
Standard picture settings (factory
setting)
Lower contrast for darkened room
(factory setting)
Designed for viewing
of PC tables
and documents
Your personal preferences
Note: PC mode is available for HOMI and PC
inputs only (grayed out for other input sources).
I 42
(continued)