Preparing
the
remote
control
for
use
Your
TV
remote control can operate your
TV
and
many other devices such as cable converter boxes,
satellite receivers, VCRs,
DVD
players, and HTlBs
(home theater
in
a box), even if they are different
brands.
If
you
have
a
Toshiba
device:
Your TV remote control is preprogrammed to operate
most Toshiba devices
(~
page 23).
If
you
have
a
non-Toshiba
device
or
a
Toshiba
device
that
the
remote
control
is
not
preprogrammed
to
operate:
You can program the TV remote control so it will
operate the other device
(~
pages
23-27).
Installing
the
remote
control
batteries
1 Remove the battery cover from the back
of
the
remote control.
Squeeze tab n
~,--------IOo)
and lift cover.
~~
.
2 Install two
"AAA"
size batteries, making sure to
match the
+ and - signs on the batteries to the
signs on the battery compartment.
3 Reinsert the battery cover in the remote control
until the tab snaps.
Caution: Batteries must not
be
exposed
to
excessive heat such as sunshine, fire
or
the
like.
Note:
• Be sure
to
use AAA size batteries.
• Dispose
of
batteries
in
a designated disposal
area.
• Batteries should always
be
disposed
of
with
the environment in mind. Always dispose
of
batteries
in
accordance
with applicable laws
and
regulations.
•
If
the remote control does not operate
correctly,
or
if the operating range becomes
reduced, replace batteries with
new
ones.
•
When
necessary
to
replace batteries
in
the
remote control, always replace both batteries
with
new
ones. Never mix battery types
pr
use
new
and
used batteries
in
combination.
• Always remove batteries from the remote
control
if
they are
dead
or
if
the remote
control
is
not
to
be
used
for an extended
period
of
time.
This
will prevent battery
acid
from leaking into the battery compartment.
Remote
control
effective
range
....
-._-
..
For
optimum performance, aim the remote control
directly at the TV and make sure there is no
obstruction between the remote control and the TV.
Point remote control toward
remote sensor on front of
TV.
16.4 ft (5m)
21