Chapter
6:
Using
the
TV's
features
Mode
Description
Note:
The
screen
is
disrupted momentarily
when adjusting the
PC settings.
This
is not a
sign
of
malfunction.
Moves the picture up/down.
The adjustmentrange
is
within ±10 from
center*
Moves the picture left/right.
The adjustment range
is
within ±50 from
center.
*
Vertical
Position
Horizontal
Position
To
unlock the control panel:
Select
Off
in
step 5 above,
or
press and hold the
VOLUME
- button on the
TV
control panel for about
10
seconds until the volume icon appears.
5 Press
~
to select
On.
When the control panel
is
locked and any button on the control panel
(except
POWER)
is
pressed, the message
"NOT
AVAILABLE" appears.
Setting
the
PC
Audio
* The default settings may vary depending
on
the input signal format.
This function allows you to output or mute the sound
from your
PC
when connecting using the PC IN
terminal and an analog RGB cable.
(u:<Y
page 18)
To
set
the
PC
Audio:
Highlight this item then press @
to get an optimum adjustment
automatically.
Helps to reduce noise and sharpen the
picture.
The adjustment range
is
within ±16 from
center.
*
Helps to reduce noise and minimize
periodic vertical stripes
on
the screen.
The adjustment range
is
within ±10 from
center.
*
Auto
Adjust
Clock
Phase
Sampling
Clock
1
MENU
Press 0 and open the
Sound
menu.
2 Highlight
Audio
Setup
and press @.
3
Press'"
or
.... to select
PC
Audio
and then press
....
or
~
to select
No
or
Yes.
Yes:
When viewing the PC input, the audio from
the PC Audio input can be heard.
No:
When viewing the PC input, there will be no
audio.
Note:
Because the PC
and
HDMI-1 inputs
share the same set
of
analog audio inputs,
the PC
Audio
menu setting influences the
HOMI
1
Audio
menu setting. If PC
Audio
(continued)
Note: Ifa PC
is
not connected
or
there
is
no
pc
input signal, this feature will
be
grayed
out
in
the
Setup
menu.
4
Press'"
or
.... to highlight the item you want to
adjust.
5 Press
....
or
~
to make the appropriate
adjustments.
Using
the
PC
settings
feature
You
can view an image from a PC on the TV screen.
When a PC
is
connected to the TV's
PC
IN
terminal, you can use the PC Settings feature to
make adjustments to the image.
If
the edges
of
the
picture are cut off, readjust the
Horizontal
Position
and
Vertical
Position.
If
the picture
is
affected by
interference, readjust the
Clock
Phase
and
Sampling
Clock.
To
adjust
the
PC
settings:
1 Repeatedly press
~NPUT)
to select PC input mode
(u:<Y
"Selecting the video input source to view"
page 35).
2
MENU
Press 0 and open the
Setup
menu.
3 Highlight
PC
Settings
and press @.
I
50
To Next Page
Loading...
