Adjusting
the
picture
quality
You
can adjust the picture quality (Contrast,
Backlight, DynaLight
lM
, Brightness, Color, Tint, and
Sharpness) to your personal preferences.
Selection-·
-Pressing'"
Pressing
..
Contrast lower higher
Backlight* darker lighter
DynaLight**
On/Off
On/Off
Brightness darker lighter
Color
paler
deeper
Tint reddish greenish
Sharpness softer sharper
.,.
Backlight
This feature adjusts the brightness of the
entire screen. When
in
video mode and no
signal
is
input, this will automatically be set to
O.
(Settings are stored
in
memory.)
** DynaLight
This function automatically strengthens the
black coloring of dark areas
in
the video
according to the level of darkness.
To
adjust
the picture quality:
1
MENU •
Press 0 and open the
Picture
menu.
2 Highlight
Picture
Settings
and press @.
3 Press
...
or
~
to select the picture quality you
want to adjust
(Contrast,
Backlight,
DynaLight,
Brightness,
Color,
Tint,
or
Sharpness),
and then
press
....
or
~
to adjust the setting, as described
in
the table above.
4 To save the new settings, highlight
Done
and
press @. You can use any
of
the picture modes
(o:sr
"Selecting the picture mode," above left) as a
starting point for adjusting the picture settings.
To revert back to the base mode that you began
adjusting the picture settings from, highlight
Reset
and press @.
The picture qualities you adjusted are automatically
saved in the
Preference
mode
(o:sr
"Selecting the
picture mode," above left) until
Reset
is selected.
Using
the
closed
caption
mode
Base
closed
captions
The
closed caption mode has two options:
•
Captions-An
on-screen display
of
the dialogue,
narration, and sound effects
of
TV
programs and
videos that are closed captioned (usually marked
"CC"
in
program guides).
•
Text-An
on-screen display
of
information not
related to the current program, such as weather
or
stock data (when provided by individual stations).
To
view captions
or
text:
1
MENU
Press 0 and open the
Preferences
menu,
highlight
Base
CC
Mode.
2 Press
....
or
~
to select the desired closed caption
EXIT
mode and press 0 .
•
To
view captions:
Highlight
CC1,
CC2, CC3,
or
CC4.
(CC1
displays
translation
of
the primary language
in
your area.)
Giant
pandas
eat
leaves.
Note:
If
the program
or
video you selected
is
not closed captioned, no captions will
display on-screen.
•
To
view text:
Highlight
T1, T2,
T3,
or
T4.
Note:
If
text
is
not available
in
your area, a
black rectangle may appear on screen. If this
happens, set the Base
CC Mode
to
Off.
•
To
turn
off the closed caption mode:
Select
Off
in step 2 above.
Note:
A closed caption signal
may
not display
in
the following situations:
• When
a videotape has been
dubbed
• When the signal reception
is
weak
• When the signal reception
is
non-standard
(continued)
43
I
To Next Page
Loading...
