Unlocking
programs
temporarily
If
you try to tune the TV to a program that exceeds
the rating limits you set, the
TV
will
enter
program
lock mode and the following message will appear on-
screen:
ThiS
program exceeds the rating limit you set
Push 'MUTE' to enter
PIN
You
can
either temporarily unlock the program
or
select an unlocked program to watch.
To
temporarily unlock
the
program:
1
MUTE
Press
o.
2 Enter your four-digit PIN code and press @.
If
the correct code is entered, the program lock mode
is released and the normal picture appears. All
locking
is
disabled until the
TV
is
turned off, and
will be enabled when the
TV
is turned on again.
Using
the
input
lock
feature
You
can use the Input Lock feature to lock the video
inputs
(VIDEO
1,
VIDEO
2,
ColorStream
HD,
HDMI1,
HDMI
2,
HDMI
3,
HDMI
4, and
PC)
and channels 3 and
4. You will not be able to view the input sources or
channels until you unlock the inputs.
To
lock/unlock the video inputs:
1 From the locks menu, Press T to display the PIN
code entering screen.
2 Enter your four-digit
PIN
code and press @.
3 Press T to highlight
Input
lock and press
~
to
select the level
of
video input locking you prefer,
as described below.
Using
the
GameTimer®
You
can use the GameTimer to set a time limit for
playing a video game
(30-120 minutes). When the
GameTimer expires, the TV enters Input Lock mode
and locks out the input source for the video game
device.
To set
the
GameTimer®:
1
From
the locks menu, press T to display the
PIN
code
entering screen.
2
Enter
your
four-digit
PIN
code
and press @.
3 Press T to highlight
GameTimer
and press
~
to
select the length
of
time until the Input Lock is
activated
(30, 60, 90,
or
120 minutes).
To cancel
the
GameTimer®:
Select
Off
in step 3 above.
To
deactivate
the
Input
Lock
once the
GameTimer® has activated
it:
Set
the
Input
lock to
Off
(1&
"Using
the input lock
feature" as described).
Note:
• A
message
will
appear
when 10 minutes,
3 minutes,
and
1minute remain on the
Game
Timer.
•
If
the
TV
loses
power
with time remaining on the
Game
Timer,
when
power
is
restored the
TV
will
enter Input Lock
mode
(as if the GameTimer
had
been activated)
and
you will have
to
deactivate
the Input Lock (as described before).
EXIT
4 Press
O·
Mode
Video
Video+
Off
Oe$cription
Locks VIDEO I,
VIDEO
2,
ColorStream HO,
HOMI
I,
HOMI
2,
HOMI 3,
HOMI
4, and
Pc.
Locks
VIDEO
I,
VIDEO
2, ColorStream
HO,
HOMI
I,
HOMI
2,
HOMI
3, HOMI
4. PC and channels 3 and 4.
• Select
Video+
if
you play video tapes
via an
ANT/CABLE
input.
Unlocks all video inputs and channels 3
and 4.
Using
the
control
panel
lock
feature
You can lock the control panel to prevent
your
settings from being
changed
accidentally (by
children, for example).
When
the control panel lock
is
On,
none
of
the controls
on
the
TV
control panel
will operate
except
POWER.
To lock
the
control panel:
1 Press
MOU
and highlight the locks menu icon.
2 Press T to display the PIN
code
entering screen.
3 Enter
your
four-digit PIN
code
and press @.
4 Press T to highlight
Control
Panel
lock.
(continued)
49
I
To Next Page
Loading...
