Chapter
6:
Using
the
TV's
features
3
Press'"
or
'"
to select
Audio.
and then press
<lIlI
or
~
to select the desired service.
4
EXIT
Press
O.
Selecting
stereo/SAP
broadcasts
The
multi-channel
TV
sound
(MTS)
feature allows
you to output high-fidelity stereo sound. MTS
also can tran"mit a second audio program (SAP)
containing a second language. music.
or
other audio
information (when provided by individual stations).
When the
TV
receives a stereo
or
SAP
broadcast. the
word "STEREO" or "SAP"
appear,
on-screen when
RECALL.
d
Th
MTS C • I .
o
IS
presse.
e ,eature
'S
on
yavailable
for analog signals on the
ANT/CABLE
input.
To listen to stereo
sound:
1
MENU
Press 0 and open the
Sound
menu.
2 Highlight
Audio
Setup
and press
8.
3 In the
MTS
field. select
Stereo.
4 To save the new settings. highlight
Done
and
press
8.
To reset the settings to the factory defaults.
highlight
Reset
and press
8.
Note:
•
You
can typically leave the
TV
in
Stereo
mode
because
it
will automatically output
the type
of
sound
being
broadcast
(stereo
or
monaural).
• If the stereo
sound
is noisy,
select
Mono
to
reduce the noise.
To listen to
an
alternate
language on
an
ATSC digital station (if available):
Highlight the
Language
field
in
step 3 above. and
then press
<lIlI
or
~
to select the language you prefer.
To listen to a second
audio
program
on
an
analog station (if available):
Select
SAP
in
step 3 above.
Note:
• A secondaudio program
(SAP)
can
be
heard only
on those
TV
stations that offer
it.
For example, a
station might broadcast another language as a
second audio program. Ifyou have SAP
on,
you
will see the current program on the screen
but
hear the other language instead
of
the programs
normal audio.
• Ifyou have SAP on
and
the station you are
watching
is
not broadcasting a second audio
program, the stations normal audio will
be
output. However, occasionally there
is
no sound
at all in
SAP
mode. If this happens. set the
MTS
feature
to
Stereo
mode.
Adjusting
the
audio
quality
You
can adjust the audio quality by adjusting the
bass. treble, and balance.
To
adjust
the
audio quality:
1
MENU
Press 0 and open the
Sound
menu.
2 Highlight
Audio
Settings
and press
8.
3
Press'"
or
...
to highlight the item you want to
adjw,t
(Bass.
Treble,
or
Balance).
4 Press
<lIlI
or
~
to adjust the level.
•
<lIlI
makes the bass
or
treble weaker
or
increases the balance in the left channel
(depending on the item selected).
•
~
makes the bass
or
treble stronger
or
increases the balance
in
the right channel
(depending on the item selected).
5 To save the new settings. highlight
Done
and press
8.
To reset the settings to the factory defaults,
highlight
Reset
and press
8.
Selecting
the
optical
audio
output
format
You
can use this feature to select the optical audio
output format when you connect a Dolby Digital
decoder
or
other digital audio
,ystem
to the
Optical
Audio
Out
terminal on the
TV
(see
"Connecting
a
digital audio
,y,tem"
on page 18).
To select the optical
audio
output
format:
1
MENU
Press 0 and open the
Sound
menu.
2 Highlight
Audio
Setup
and press
8.
3
In
the
Optical
Output
Format
lield, select either
Dolby
Digital or
peM.
depending on your device.
4 To save the new settings. highlight
Done
and press
8.
To revert to the factory default,. highlight
Reset
and press
8.
(COII/illlled)
45
I
To Next Page
Loading...
