430 Series
(d) Shadow BIOS ROM
Displays 192 KB of RAM, which is reserved for the Shadow BIOS ROM.
The value cannot be changed.
2. Display
This option configures the computer’s display.
(a) Display Adapter
This field displays the internal controller for the VGA internal display. Only
VGA compatible is displayed. You cannot change it.
(b) LCD Display Mode
The LCD displays text in 80 characters by 25 lines and graphics in 800 by
600 pixels for either Color or Monochrome mode. Use this option to set the
computer’s display mode to Color or Monochrome.
Color Selects color mode. (Default)
Monochrome Selects monochrome mode. Some software is
displayed better in monochrome mode.
(c) VGA Segment Address
Use this option to set the VGA segment address from the following option:
C000H, E000H, E400H (Default)
NOTE: In the DOS environment, if you choose either E400H or C000H,
the Pop-up window is not displayed when you press the Fn+F2 or
Fn+F3 hotkeys. However, the corresponding functions of the keys work.
(d) LCD Display Colors
Used to select the color palette of the internal display when the LCD mode
is set to Color.
TFT display
256K colors Displays 16M colors. (This value cannot be
changed.)
DSTN display
222K colors Displays 256 colors out of 226,981 colors.
4096 colors Displays 256 colors out of 4096 colors.
To Next Page
Loading...
